512722 ABS Case
Sale! Original price was: $350.00.$97.90Current price is: $97.90.Quick ViewExternal Dim.(L*W*D) 557*348*248mm
Internal Dim (L*W*D) 522*275*185mm
Lid Depth: 45mm
Base Depth: 140mm
Material: TSU-1 Resin
Weight: 6.87kg(15.1lbs)
Waterproof IP 67
Dirty Rigger Gaffer Tape Holder
$16.00Quick ViewAn extra hand by your side.
Acting as a tool leash, the Gaffer Holder quickly and securely offers an accessible strap for holding tools, clamps, bags and its original design intention – gaffer tape. The quick release buckle allows for single handed use, while the adjustable strap provides up to a 70cm circumference for larger items. The lightweight aluminium snap hook secures the holder to your belt, or any compatible Dirty Rigger® tool pouch or tool belt.
- Multi-purpose strap
- Quick release buckle
- Adjustable strap provides up to a 70cm circumference
- Lightweight aluminium snap hook
Gaffer roll not included. General use only. Not intended for working at height or fall arrest.
Dirty Rigger Glove Clip
$15.00Quick ViewClip’em. Keep’em.
Don’t leave gloves behind, clip them on right by your side with the Dirty Rigger® Glove Clip.
- Single-handed unclip
- Engineer grade, utra tough material
- Non-conductive
- 5kg/7lbs break-away
- Size: 12.5cm (L) x 3.3cm (W)
Glove not included. Measurements are approximate
Dirty Rigger Radio Pouch
$41.00Quick ViewUniversal radio pouch, with multi-point attachment.
Wear it your way with the new Radio Pouch from Dirty Rigger. Dual mounting options give you more flexibility on radio location, allowing you to work more freely. Fitted with a traditional pass-through for belt attachment, and also a vertical pass-through for secure mounting onto almost any chest rig.
Like all the pouches in the Dirty Rigger™ range, the Radio Pouch is efficient, reliable and built to last!
- Elasticated, universal fit radio pouch
- Waist and chest mountable
- Open top and corners for maximum audio output/reception
- Ultra-tough, 1200 denier construction
- Single handed buckle access
- Ultra-light weight (only 84 grams)
- Pouch size: 180mm(h) x 80mm(w) x 60mm(d)
- Radio pocket size (unstretched): 110mm(h) x 60mm(w) x 40mm(d) (larger when stretched)
Dirty Rigger Padded Utility Belt
$60.00Quick ViewBreathable padded tool belt.
Spread the load with an extra wide 12.7cm (5”) padded belt-back, lined with a breathable mesh and specially selected foam for optimum all-day comfort. Move freely as the belt narrows at the front and sides, minimising bulk and restriction of movement, often found in wider belts. Four quick access, repositionable D-rings provide you with even more versatility for accessory attachment. Compatible with all Dirty Rigger® tool pouches and accessories.
- Extra wide 5 inch padded back
- Narrower sides and front for freedom of movement
- Breathable mesh for ventilation
- Four repositionable D-rings for extra attachments
- Heavy duty, quick release belt buckle
- Outer belt strap – 5cm wide
- Inner belt – 9cm (front width) 12.7cm (back width)
- Adjust to fit sizes 30″-42″
Ensure the belt and all added attachments i.e. tools, tool pouches & their contents are adequately secured. This item is intended as a general use tool belt.
Dirty Rigger Gear Bag
$198.00Quick ViewA rigger’s day, all in one bag.
Keep everything you need right by your side in the Dirty Rigger® Gear Bag. 12 ltrs of organised space, constructed using heavy duty materials and a water resistant outer shell. Padded walls help cushion everything from tools and equipment to tablet devices and drink flasks. 11 inner tool slots give one-handed access to your on-the-moment essentials while a huge central storage compartment caters for almost anything you need. Carry it all using the adjustable seatbelt-style strap and shoulder pad.
- Heavy duty and water resistant
- Designed and hand made in the UK
- 12 ltrs of internal storage
- Large central storage compartment – 33cm(W) x 12cm(D) x 25cm(H)
- 11 inner tool slots
- Padded external walls
- Separate smart phone pocket – 9cm(W) x 5cm(D) x 20cm(H)*
- Padded front pocket for tablet devices – 26cm(W) x 7cm(D) x 23cm(H)*
- 2 external D-rings for extra attachments
- Hook and loop closure flap with added buckle
- Padded, adjustable seatbelt-style shoulder strap
- Rear zip-close pocket – 33cm(W) x 1cm(D) x 22cm(H)*
- Grab handle
- Overall dimensions – 39cm(W) x 17cm(D) x 28cm(H)
Pouch contents not included. Measurements are approximate
*Pockets may be more narrow at the base.Ensure tools remain securely held in place at all times.
If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.-
Dirty Rigger Podger Holster
$30.00Quick ViewThe handy little pocket for your Podger
Keep your podger right by your side with the Dirty Rigger® Podger Holster. Tidy and discreet, the holster is designed to fit the Dirty Rigger 4-in-1 Podger and most other podgers of equal size.
- Discreet podger holster
- Durable 1200 denier nylon polyester construction
- Moulded EVA foam helps maintain holster shaping
- Belt clip & belt loop for your preferred attachment
Podger not included. Measurements are approximate.
Ensure tools remain securely held in place at all times.
If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard. Dirty Rigger LED Chest Rig
$81.00Quick ViewStore your tools close to your chest.
Store your essentials on this lightweight, compact Chest Rig with an integrated 15 lumen LED. The light source is easily removed for hand-held use and comes complete with a replaceable battery pack. A full-width zip-lock pouch gives quick access to your tools and an adjustable button-lock pocket holds most two-way radios.
- Integrated 15 lumen LED
- Auto shut-off power save feature
- Replaceable battery pack
- Ultra-durable 600×600 denier material
- Zip-lock central pocket – 22cm(H) x 20cm(W) x 3cm(D)*
- Button-lock two-way radio pocket – 10cm(H) x 6cm(W) x 3cm(D)*
- Front pocket with closure flap – 14cm(H) x 10cm(W) x 2cm(D)
- Strap-mounted D-ring for additional attachments
- Fully adjustable shoulder and torso straps
- Unloaded size (main chest pack area) 20.5cm(H) x 20cm(W) x 4cm(D)
Pouch contents not included. Measurements are approximate
*Pockets may be more narrow at the base.Ensure tools remain securely held in place at all times.
If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.Dirty Rigger Compact Utility Pouch
$31.00Quick ViewCompact Versatility.
Our unique design provides essential tool storage in an ultra-compact space. Simply attach it to your belt and you’ll almost instantly forget it’s there. This clenched-fist sized pouch utilises every millimetre of space with heavy duty elastic technology which constantly contracts to make the bag no bigger than it ever needs to be. With 6 screw-driver slots, 3 layered pockets and one expandable centre pocket, you’d be amazed just how much you can get in.
- Compact expandable storage
- Shape-mantaining structure
- Magnetic closure flap
- 4 external open-bottomed screwdriver pockets
- 2 internal screwdriver pockets
- 1 internal back pocket – 8cm(H) x 6cm(W)*
- 1 internal central storage pocket – 8cm(H) x 6cm(W) x 5cm(D)*
- 2 front mounted pockets – 7cm(H) x 7cm(W)*
- Belt loop attachment
- Ultra-durable 600×600 denier material
- Unloaded size 14cm(H) x 9.5cm (W) x 5cm (D)*
Pouch contents not included. Measurements are approximate
*Pockets may be more narrow at the base/edge.Ensure tools remain securely held in place at all times.
If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.Dirty Rigger Tech Pouch 2.0
$53.00Quick ViewIt’s all about the base.
An abrasion and puncture-resistant 4mm rubber base helps prevent pointed tools from piercing through the bottom of the pouch. Keep your equipment organised with a 2.5ltr master pocket and 5 slip-in pockets positioned around the inner walls. Instantly access your most commonly used tools from four open-topped pockets on the bag’s outer edges and a built in pass-through for a long handle screwdriver gives even more versatility.
- 2.5ltr main storage pocket – 17cm(W) x 8cm(D) x 19cm(H)*
- 5 slip-in inner pockets – various sizes
- 2 instant access outer pockets (sides) – 7cm(W) x 2.5cm(D) x 13.5cm(H)*
- 2 instant access outer pockets (front) – 7cm(W) x 2.5cm(D) x 10cm(H)*
- Screwdriver pass-through
- 4 steel d-rings for additional attachments
- Side mounted grab handle
- 50mm belt loop
- Rugged 600×600 denier nylon construction
- Overall dimensions 23cm(W) x 12cm(D) x 20cm(H)
Pouch contents not included. Measurements are approximate
*Pockets may be more narrow at the base.
Ensure tools remain securely held in place at all times.
If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.Dirty Rigger Tech Pouch 1.0
$53.00Quick ViewRugged ultra-light storage.
Weighing less than 300grams, the Tech Pouch helps you keep tools organised with a 2.5ltr master pocket and 5 slip-in pockets positioned around the inner walls. Instantly access your most commonly used tools from two open-topped pockets on the bag’s outer edges and a built in pass-through for long handle screwdrivers gives even more versatility. A handy button-lock front pocket holds most 8m tape measures and two additional open-topped mini pockets give you somewhere to store those often illusive smaller items.
- 2.5ltr main storage pocket – 17cm(W) x 8cm(D) x 19cm(H)*
- 5 slip-in inner pockets – various sizes
- 2 instant access outer pockets – 7cm(W) x 2.5cm(D) x 13.5cm(H)*
- Button-lock tape measure holder – 7cm(W) x 7cm(D) x 7cm(H)*
- 2 mini pockets
- Screwdriver pass-through
- 4 steel d-rings for additional attachments
- Side mounted grab handle
- 50mm belt loop
- Rugged 600×600 denier nylon construction
- Overall dimensions 23cm(W) x 19cm(D) x 20cm(H)
Pouch contents not included. Measurements are approximate
*Pockets may be more narrow at the base.
Ensure tools remain securely held in place at all times.
If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.Dirty Rigger Pro-Pocket XT
$47.00Quick ViewMore tools, minimal bulk.
The Pro-Pocket™ XT provides a tool storage solution which falls between the Pro-Pocket™ 2.0 and the Tech Pouch / Tech Pouch 2.0 for storage capacity. While still relatively compact, its innovative internal and external layout provides an impressive level of tool storage with minimal bulk.
- Vertical storage, quick-access layout
- 1 x internal smart phone compartment: 10cm(h) x 8cm(w) x 3cm(d) (fit sizes up to iPhone 6/7 Plus)
- 1 x internal tool compartment: 15cm(h) x 6cm(w) x 4cm(d)
- 2 x external, instant-access elasticated tool loops (2cm un-stretched diameter)
- 2 x external D-ring attachments
- 1 x detachable 27cm accessory loop
- 1 x top-mounted snap hook
- 2 x vertical tool slots mounted in each internal compartment (4 slots in total)
- Headphone cable pass-through (phone compartment only)
- Constructed from durable 1200×1200 denier nylon polyester
- Belt clip & belt loop for preferred attachment
Tool bag contents & accessories not included. Measurements are approximate.
Ensure tools remain securely held in place at all times.
If using this item while working at height you should ensure tools are adequately secured and could not become a ‘falling object’ hazard.786639 ABS Case
Sale! Original price was: $1,130.00.$361.90Current price is: $361.90.Quick ViewExternal Dim.(L*W*D):847*722*432mm
Internal Dim(L*W*D): 786*661*391mm
Lid Depth: 90mm
Bottom Depth:300 mm
Material: TSU-19 Resin
Weight: 15Kg
Waterproof IP 67
Special design and material, lighter weight version-544025 ABS Case
Sale! Original price was: $620.00.$196.90Current price is: $196.90.Quick ViewExternal Dim.(L*W*D)610*472*285mm
Internal Dim(L*W*D):540*407*248mm
Lid Depth: 58mm
Bottom Depth: 190mm
Material: TSU-1 Resin
Weight: 9.2Kg
Waterproof IP 67
With Wheels and retractable handle483720 ABS Case
Sale! Original price was: $350.00.$108.90Current price is: $108.90.Quick ViewExternal Dim.(L*W*D)530*435*240mm
Internal Dim(L*W*D):480*370*195mm
Lid Depth: 35mm
Bottom Depth: 160mm
Material: TSU-1 Resin
Weight: 6.5Kg
Waterproof IP 67
With Wheels and retractable handle533120 ABS Case
Sale! Original price was: $340.00.$108.90Current price is: $108.90.Quick ViewExternal DIM.(L*W*D): 545*345*225mm
Internal DIM.(L*W*D): 530*310*200mm
Lid Depth: 40mm
Bottom Depth: 160mm
Material:TSU-19 Resin
Weight:5.75Kg
With trolley and wheels
Waterproof IP67443412 ABS Case
Sale! Original price was: $200.00.$64.90Current price is: $64.90.Quick ViewExternal Dim.(L*W*D)479*415*150mm
Internal Dim(L*W*D):446*345*121mm
Lid Depth: 44mm
Bottom Depth: 77mm
Material: TSU-1 Resin
Weight: 4.12Kg
Waterproof IP 67332317 ABS Case
Sale! Original price was: $176.00.$53.90Current price is: $53.90.Quick ViewExternal Dim.(L*W*D): 357*293*193mm
Internal Dim(L*W*D):330*231*165mm
Lid Depth: 43mm
Bottom Depth: 122mm<span class=”aal”> </span>
Material:TSU-1 Resin
Weight: 2.5Kg
Waterproof IP 67231815 ABS Case
Sale! Original price was: $90.00.$31.90Current price is: $31.90.Quick ViewExternal Dim.(L*W*D)270*231*180mm
Internal Dim(L*W*D):244*185*153mm
Lid Depth: 28mm
Bottom Depth: 125mm
Material: TSU-1 Resin
Weight: 1.3Kg
Waterproof IP 67221609 ABS Case
Sale! Original price was: $50.00.$42.90Current price is: $42.90.Quick ViewExternal Dim.(L*W*D)250*218*113mm
Internal Dim(L*W*D):220*161*93mm
Lid Depth: 19mm
Bottom Depth: 74mm
Material:TSU-1 Resin
Weight: 1.0Kg
Waterproof IP 67-
MADRIX® 5 Preprogrammer
$323.40Quick ViewMADRIX 5 is the ultimate control tool for your LED lighting.
Use pixel mapping at its best in 2D or 3D.MADRIX® 5 Preprogrammer, Provides no output for MADRIX 5 but removes major limitations of the demo mode ( * Does not include USB Dongle * )
MADRIX® 5 KEY start – 2 Universe
$323.40Quick ViewMADRIX 5 is the ultimate control tool for your LED lighting.
Use pixel mapping at its best in 2D or 3D.MADRIX® 5 KEY start, Provides the output license for 2x 512 DMX channels and 64 x 64 DVI voxels for MADRIX ( * Does not include USB Dongle * )
-
MADRIX® 5 KEY entry – 8 Universe
$1,024.32Quick ViewMADRIX 5 is the ultimate control tool for your LED lighting.
Use pixel mapping at its best in 2D or 3D.MADRIX® 5 KEY entry, Provides the output license for 8x 512 DMX channels and 128 x 128 DVI voxels for MADRIX ( * Does not include USB Dongle * )
-
MADRIX® 5 KEY basic – 32 Universe
$2,013.00Quick ViewMADRIX 5 is the ultimate control tool for your LED lighting.
Use pixel mapping at its best in 2D or 3D.MADRIX® 5 KEY basic, Provides the output license for 32x 512 DMX channels and 512 x 512 DVI voxels for MADRIX ( * Does not include USB Dongle * )
-
MADRIX® 5 KEY professional – 128 Universe
$4,707.78Quick ViewMADRIX 5 is the ultimate control tool for your LED lighting.
Use pixel mapping at its best in 2D or 3D.MADRIX® 5 KEY professional, Provides the output license for 128x 512 DMX channels and 1,024 x 1,024 DVI voxels for MADRIX ( * Does not include USB Dongle * )
-
MADRIX® 5 KEY ultimate – 512 Universe
$11,446.38Quick ViewMADRIX 5 is the ultimate control tool for your LED lighting.
Use pixel mapping at its best in 2D or 3D.MADRIX® 5 KEY ultimate, Provides the output license for 512x 512 DMX channels and 2,048 x 1,024 DVI voxels for MADRIX ( * Does not include USB Dongle * )
-
MADRIX® 5 KEY maximum – 2048 Universe
$28,291.56Quick ViewMADRIX 5 is the ultimate control tool for your LED lighting.
Use pixel mapping at its best in 2D or 3D.MADRIX® 5 KEY maximum, Provides the output license for 2,048x 512 DMX channels and 2,048 x 1,024 DVI voxels for MADRIX ( * Does not include USB Dongle * )
-
MADRIX® RADAR Fusion Small
$705.60Quick ViewThe MADRIX RADAR fusion is a software license designed to unlock management, configuration, and monitoring functionality on up to 512 devices/sub-devices for MADRIX RADAR. The software works on computers using the Windows 10, 64-bit operating system only and requires a valid, separately available MADRIX KEY and a one-time online activation.
MADRIX® RADAR Fusion Small, Unlock management, configuration, and monitoring of up to 32 RDM devices ( * Does not include USB Dongle * )
-
MADRIX® RADAR Fusion Medium
$5,646.90Quick ViewThe MADRIX RADAR fusion is a software license designed to unlock management, configuration, and monitoring functionality on up to 512 devices/sub-devices for MADRIX RADAR. The software works on computers using the Windows 10, 64-bit operating system only and requires a valid, separately available MADRIX KEY and a one-time online activation.
MADRIX® RADAR Fusion Medium, Unlck management, configuration, and monitoring of up to 256 RDM devices ( * Does not include USB Dongle * )
-
MADRIX® RADAR Fusion Large
$45,173.10Quick ViewThe MADRIX RADAR fusion is a software license designed to unlock management, configuration, and monitoring functionality on up to 512 devices/sub-devices for MADRIX RADAR. The software works on computers using the Windows 10, 64-bit operating system only and requires a valid, separately available MADRIX KEY and a one-time online activation.
MADRIX® RADAR Fusion Large, Unlck management, configuration, and monitoring of up to 2048 RDM devices ( * Does not include USB Dongle * )
MADRIX AURA 2
$914.90Quick ViewMADRIX AURA is small in size, but mighty in features. It is the MADRIX stand-alone unit.
Configurations with 2, 12, or 32 universes bring captivating installations to life. As the central hub, you can count on independent lighting control. The built-in website makes it easy to get started.
First, record any Art-Net or Streaming ACN network stream live. MADRIX AURA then plays back sophisticated light shows, effects, and visuals from SD card. Run a scheduled playlist, or trigger scenes externally with choices like MADRIX ORION.
Simply press record. Simply press play.
MADRIX® AURA 2 , Stand-Alone Recorder/Player, 2 Universes Over Network, DIN Rail
MADRIX AURA 12
$1,600.90Quick ViewMADRIX AURA is small in size, but mighty in features. It is the MADRIX stand-alone unit.
Configurations with 2, 12, or 32 universes bring captivating installations to life. As the central hub, you can count on independent lighting control. The built-in website makes it easy to get started.
First, record any Art-Net or Streaming ACN network stream live. MADRIX AURA then plays back sophisticated light shows, effects, and visuals from SD card. Run a scheduled playlist, or trigger scenes externally with choices like MADRIX ORION.
Simply press record. Simply press play.
MADRIX® AURA 12 , Stand-Alone Recorder/Player, 12 Universes Over Network, DIN Rail
MADRIX AURA 32
$2,744.00Quick ViewMADRIX AURA is small in size, but mighty in features. It is the MADRIX stand-alone unit.
Configurations with 2, 12, or 32 universes bring captivating installations to life. As the central hub, you can count on independent lighting control. The built-in website makes it easy to get started.
First, record any Art-Net or Streaming ACN network stream live. MADRIX AURA then plays back sophisticated light shows, effects, and visuals from SD card. Run a scheduled playlist, or trigger scenes externally with choices like MADRIX ORION.
Simply press record. Simply press play.
MADRIX® AURA 32, Stand-Alone Recorder/Player, 32 Universes Over Network, DIN Rail
MADRIX ORION
$762.30Quick ViewAs a general-purpose input device, MADRIX ORION fits right in.
Transform your next project by introducing interactive elements. How about a convenient button? How about a motion sensor?
Connect switches, potentiometers, and triggers. Include sensors for light, temperature, passive infrared, and more. Integrate building automation and home automation.
8 versatile inputs receive analog signals from 0 V – 12 V. Converted into 8-bit or 16-bit digital DMX, MADRIX ORION outputs Art-Net or Streaming ACN over Ethernet network.
MADRIX STELLA
$743.40Quick ViewThe MADRIX STELLA is a dedicated control interface for DMX512 and Art-Net or Streaming ACN that is designed for high quality and practicability in permanent LED installations.
MADRIX STELLA ; Network Node / USB 2.0 DMX512 Interface; 2x DMXIN/OUT; RDM; DIN Rail
MADRIX NEBULA
$495.60Quick ViewMADRIX NEBULA delivers on that promise. This output controller directly connects to a wide range of digital LEDs.
It supports over 70 ICs, each usually offering several frequencies. With regular additions to this list, you are free to choose the best available solution for any current, future, or maintenance work.
The many options to wire power, data, and integrate the device allow you to face the most challenging installs. While our world-class support team is here for you, highly detailed illustrations in the manual are there with you.
And despite the serial nature of the signal, MADRIX NEBULA makes sure that not a single one of the 2,048 individual RGB pixels lags behind.
MADRIX NEBULA empowers new designs for you to create exciting experiences.
MADRIX® LUNA 4
$1,372.00Quick ViewThe MADRIX LUNA reliably distributes DMX512 data over long or short distances using Ethernet network or USB. Its sync mode makes sure that lighting effects look their best on the LEDs.
MADRIX® LUNA 4 , Network Node / USB 2.0 DMX512 Interface, 4x DMX-OUT, 1x DMX-IN, 19′′, Power Cord: EU Or US
MADRIX® LUNA 8
$1,829.80Quick ViewThe MADRIX LUNA reliably distributes DMX512 data over long or short distances using Ethernet network or USB. Its sync mode makes sure that lighting effects look their best on the LEDs.
MADRIX® LUNA 8 , Network Node / USB 2.0 DMX512 Interface, 8x DMX-OUT, 1x DMX-IN, 19′′, Power Cord: EU Or US
MADRIX® LUNA 16
$2,744.00Quick ViewThe MADRIX LUNA reliably distributes DMX512 data over long or short distances using Ethernet network or USB. Its sync mode makes sure that lighting effects look their best on the LEDs.
MADRIX® LUNA 16 , Network Node / USB 2.0 DMX512 Interface, 16x DMX-OUT, 1x DMX-IN, 19′′, Power Cord: EU Or US
-
MADRIX USB ONE
$366.10Quick ViewOne of the smallest USB interfaces for DMX output or input.
The MADRIX USB ONE allows you to control 512 DMX channels using MADRIX 5. Mainly used for DMX input, an additional MADRIX KEY (a software license) is required for DMX output.
Showing 1–40 of 138 results